Start a new topic

Wikitude SDK Questions or Problems

We are trying to create wto file for a 3D printed model of a kiosk using the wikitude studio. Some sample photos of a kiosk are attached.  We have seen that 3d object detection is more succesful when we are looking from the front side of the object. From the left side, the right side or from the rear side of the object, object detection is not running as good as we wish. what is your recomendation.

(7.77 MB)


Details can be found in this post:

For more efficiency I would like to ask you to only post the same question only once, so we can make sure that we're working as good as we can.

Thx and greetings


Each time we upload the same images, we get a different wto object after the process at your side. Here is the link of the images we use for target object creation.


Password: 1q2w3e4r



An other point is that sometimes the faces of the 3D object are mixed with other faces of the same 3D object(for example front face of the object seems to be extended with left or right face of the object) when we open the wto object in the wikitude studio, and some faces are rotated 90 degrees.


The wto objects are under user account:


2901_vnd210_3  is the Project name.




vnd210_2  are the object target names.


The side and back don't have much structure or contrast -  this might be the main reason. Our object recognition currently is  working based on feature points that can be extracted within the object  (so any difference in color, struture, etc. helps for the extraction). 

From  what I see in the images, if the object only has this grey wall color,  the object Recognition won't work properly. If you can, please add  structure.

Thx and greetings


Login or Signup to post a comment